Building Wire

CENTELSA’s building wires are the most practical, technical and economic solution for wiring commercial, industrial and residential installations.

These conductors are designed for operation at 600V, with copper conductors (aluminum conductors are also available) and thermoplastic or thermosetting insulation for operating at temperatures of 75°C and 90°C.

THHN/THWN-2 CT EXTRASLIDING WIRES AND CABLES 600V 90°C

Applications

CENTELSA’s THHN/THWN-2 CT wire and cables are used for electrical wiring in buildings, in feeder circuits, in branches and in indoor industrial secondary networks.
These cables are special for installations in abrasive sites or places that have been contaminated with oil, grease, gasoline or other chemicals.
These cables are suitable for Installation in ducts, pipes, boards and cable trays according to RETIE.

CENTELFLEX CABLES CT SR 1000V 105°C

Applications

CENTELSA’s CENTELFLEX Cables are used in industrial installations, in distribution and lighting systems.  These cables can be installed in dry and wet locations or submersed in water; in pipes, ducts, electrical pits, channelings and cable trays.   These cables are suitable for direct burial in sizes 8 AWG and larger in places with light traffic.

Untitled-3
Untitled-4

XHHW-2 and RHH/RHW-2 / USE-2 CABLES 600V 90°C

Applications

CENTELSA’s XHHW-2 cables are used for low voltage power distribution, in board connections, motors and wiring in buildings.

RHH/RHW-2/USE-2 cables are used for wiring power circuits in commercial, residential and industrial installations.  These cables can be installed in ducts, pipes, boards and cable trays according to RETIE.

USE-2 cables are suitable for underground service entrance installations including direct burial under the conditions suggested by NTC-4564 and UL 854.

THW-LS & THHW-LS WIRES and CABLES 600V 75°C Y 90°C

Applications

CENTELSA’s THW-LS and THHW-LS cables are used for electrical wiring in buildings, in feeder circuits, branches and industrial secondary indoor networks.

TFN WIRES and CABLES 600V 90°C

Applications

CENTELSA’s TFN wires and cables are used for internal wiring of equipment and boards. These cables are special for installations in abrasive sites or places that have been contaminated with oil, grease, gasoline or other chemicals.

SINTOX HF FR LS CT 600V 90°C

Applications

Building wires for indoor installations and control boards.  These cables are ideal for places with high concentration of people and low ventilation, where in case of fire it is essential that no emissions of halogen, toxic or corrosive gases or dark fumes are generated affecting people’s health or electronic, industrial or computer equipment.

These cables are suitable for installation in cable trays.